商品紹介
プロペラ1式(4枚)+アルミアダプター $225
※アダプタをモーターに取り付ける際は、XOAR製品に付属しているネジをお使いください。 DJI純正ネジを流用した場合、アダプタのネジ穴形状が異なるため、アダプタを完全に固定できません。
※アルミアダプターは飛行時間を重ねていくと少しずつ摩耗・劣化していきます。飛行前・後点検を行い、アダプターのがたつきは大きくなっていないか、プロペラ固定ネジに緩みはないかご確認ください。
アダプターのがたつきが大きい場合は、ご交換ください。
概要:
XOAR DJI Inspire2 カーボンファイバープロペラペアは、プレミアム品質3Kカーボンファイバーファブリックとユニークなブレードデザインで作られた、アルミニウムセルフタイトニングアダプター付きです。それは、軽量、強く、優れた耐久性と剛性、航空映画撮影、セキュリティ、農業、調査と地図作成、研究と救助、交通監視などのあらゆるプロフェッショナルなアプリケーションのためのあなたのDJI Inspire 2のための完璧な強化です。
詳細:
設計 -
本物のXoar Props DJI Inspire 2のために特別にデザインされ、作られました。
プレミアム素材 -
これらのCFプロップは、最高級の3Kカーボンファイバーファブリックと独自の樹脂システムでできており、空中用途の効率とトルクを最大限に高めるための超軽量です。 XOAR Propellersは、空中撮影、セキュリティ、農業、調査と地図作成、研究と救助、交通監視などのためのあなたのDJI Inspire 2のための完璧なアップグレードです。
高度なデザインと工芸品 -
XOAR PJP-T-Lカーボンファイバープレシジョンペアクアドコプタープロペラは、ユニークなブレード形状と細いハブで設計および製造されています。正確で反応の良い安定した性能のために、ペアは同じピッチと同じ重量を持っています。各ペアの体重差の最大許容誤差は0.5グラムです。 DJI Inspire 2では、これによって一貫した性能が発揮されます - 対向するアームの各ペアのモーターによって同じトルクが生成されます。
性能 -
DJI Inspire 2用XOARのカーボンファイバークアドコプタープロペラは、その独自の構造設計により最大の強度と耐久性を提供するように設計されています。優れた強度により、Droneの飛行中の先端の撓みが少なくなり、騒音や振動が大幅に減少し、安定した、反応の良い、滑らかで、正確で静かな飛行が得られます。
セルフタイトニングアダプター
Xoarの自己締付けアダプターは高品質のアルミニウムで作られています。支柱をしっかりと保持していることがテスト済みです。アダプターには、DJIとTモーター、KDEモーターなどの他のモーター取り付けパターンの両方をサポートするために、2組のサイド穴(2つのサイド穴の中心の間に12 mmと13 mm)が付属しています。支柱をよりしっかりと固定するために、アダプターにスレッドロッカーを適用することをお勧めします。アダプタを使用して小道具を取り付けることはオプションです。プロペラはモーターに直接取り付けることができます。
取り付け方:
1.These XOAR Props can be mounted using the XOAR Self-Tightening Adapters or directly on DJI Inspire 2's motors. First, please remove the original DJI Inspire 2 adapters.
2.Self tightening adapters are compatible with motors with mounting holes distance of 12mm and 13mm.
3.The arrow on the self tightening adapter should be pointing to the direction of propeller rotation.
4.Short screws are used to connect the bottom part of the self tightening adapter to the brushless motor using the 13mm Set of mounting holes.
5.Longer screws are used to mount the propellers to the top part of the self tightening adapters using the 13mm Set of mounting holes.
6.Please confirm the propellers are rotating in the same direction as the brushless motors before flight. (Leading edge is facing the same direction of motor’s rotation) Do not screw right on the propeller. Do not over tighten screws. Use adapter plate included.
7.Please check for loose caps and tighten them before each flight
8.Do not screw right on the propeller. Do not over tighten screws. Use adapter plate included.
9.Please Note: Final balance check is suggested before flight due to external factors such as temperature, handling during transit may vary the balance of the propeller.
同梱物:
2 x Xoar 2nd Gen PJP-T-L15X5-IN2 1550Carbon Fiber Propellers CW
2 x Xoar 2nd Gen PJP-T-L15X5-IN2 1550 Carbon Fiber Propellers CWW
4 x Aluminum Self Tightening Adapter (2 Silver for CWW, 2 Black for CW)
16 x M3 Short Screws
16 x M3 Long Screws
1 x Hex L-wrench for M3 screws.
仕様:
Propellers:
Model #: PJP-T-L15X5-IN2
Diameter: 15"
Pitch: 5
Average Net Weight / Prop: 22 ± 0.5 g
Bore Size: 5mm
Side Holes Size: M3
Side Holes Centers' Distance: 13mm
Life Span Without Damages: 200 hrs
Max. RPM: 7000
Adapters:
Each adapter has 3 pieces - Top Plate, Top Self-tightening Adapter, Bottom Self-tightening Adapter.
Adapters contain 2 sets of side holes - 1 set of side holes centers' distance is 13mm; 1 set of side holes centers' distance is 12mm. Please use the 13mm sets for installing on DJI Inspire 1.
Silver Adapter is for CWW Motor; Black Adapter is for CW Motor. Cautions: Adapters only work properly when installed at the correct direction of motor's rotation.
SPEC/状態
おすすめ商品はこちら
Tohasen Blog
-
2024/03/27DJI Terraのバインド解除方法を教えてください
-
2024/03/27「お知らせ」 DJI Terraバインド解除に関するご案内
-
2024/03/21DJI Zenmuse L2